detail bent pumps
Technical Specifications
| - | Displacement cm3/rev | Max. Continuous rpm | Max. Intermittent rpm | Max. Continuous Bar | Max. Intermittent Bar | Max. Continuous Kw | Max. Intermittent Kw | Starting Torque Theoretical Value Nm/Bar | Weight Kg |
|---|---|---|---|---|---|---|---|---|---|
| 12 | 12,5 | 7500 | 8250 | 350 | 400 | 20 | 50 | 0,20 | 9,5 |
| 17 | 17,1 | 7500 | 8250 | 350 | 400 | 25 | 70 | 0,27 | 9,5 |
| 25 | 25,5 | 5900 | 6500 | 350 | 400 | 40 | 80 | 0,40 | 9,5 |
| 35 | 34,3 | 5900 | 6500 | 350 | 400 | 55 | 110 | 0,54 | 9,5 |
| 40 | 41,1 | 5300 | 5900 | 350 | 400 | 60 | 120 | 0,66 | 15,5 |
| 47 | 47,2 | 5300 | 5900 | 350 | 400 | 65 | 135 | 0,75 | 15,5 |
| 56 | 56,1 | 5300 | 5900 | 350 | 400 | 80 | 165 | 0,89 | 15,5 |
| 64 | 63,5 | 5300 | 5900 | 350 | 400 | 90 | 180 | 1,0 | 15,5 |
| 84 | 83,7 | 4200 | 4600 | 350 | 400 | 100 | 190 | 1,33 | 19 |
| 90 | 90,2 | 4200 | 4600 | 350 | 400 | 110 | 205 | 1,44 | 19 |
| 108 | 108,0 | 4200 | 4600 | 350 | 400 | 130 | 245 | 1,71 | 19 |
| 130 | 130,1 | 4200 | 4600 | 350 | 400 | 135 | 255 | 2,06 | 36 |
Bent Axis Motor SAE
Data concerning RPM are based on maximum premitted peripheral velocity of the tapered roller bearing.
Max intermittent power data may vary +dependent on application.
Continuous power data are based on maximum output power without external cooling of the motor housing.
lntermittent duty is defined as follows: max 6 seconds per minute, e g peak RPM when unloading or accelerating.
For Connection Cover, Shaft and Mounting Flange options visit Datasheet
-
Suction Fittings Clamp
-
Suction Fittings Clamp 45
-
Suction Fittings Clamp Threaded
Accessories
Optional
