detail bent pumps
Technical Specifications
| - | Displacement cm3/rev | Max. Continuous rpm | Max. Intermittent rpm | Max. Continuous Bar | Max. Intermittent Bar | Max. Continuous Kw | Max. Intermittent Kw | Starting Torque Theoretical Value Nm/Bar | Weight Kg |
|---|---|---|---|---|---|---|---|---|---|
| 40 | 41,1 | 5700 | 6300 | 350 | 400 | 60 | 125 | 0,66 | 18,5 |
| 47 | 47,2 | 5700 | 6300 | 350 | 400 | 65 | 145 | 0,75 | 18,5 |
| 56 | 56,1 | 5700 | 6300 | 350 | 400 | 80 | 175 | 0,89 | 18,5 |
| 64 | 63,5 | 5700 | 6300 | 350 | 400 | 90 | 195 | 1,0 | 18,5 |
| 84 | 83,7 | 4700 | 5200 | 350 | 400 | 100 | 215 | 1,33 | 27,5 |
| 90 | 90,2 | 4700 | 5200 | 350 | 400 | 110 | 230 | 1,44 | 27,5 |
| 100 | 108,0 | 4700 | 5200 | 350 | 400 | 110 | 230 | 1,71 | 27,5 |
Bent Axis Motor M2
Data concerning RPM are based on maximum premitted peripheral velocity of the tapered roller bearing.
Max intermittent power data may vary +dependent on application.
Continuous power data are based on maximum output power without external cooling of the motor housing.
lntermittent duty is defined as follows: max 6 seconds per minute, e g peak RPM when unloading or accelerating.
For Connection Cover, Shaft and Mounting Flange options visit Datasheet
-
Suction Fittings Clamp
-
Suction Fittings Clamp 45
-
Suction Fittings Clamp Threaded
Accessories
Optional
